Setting the transmission channels on the transmitter boxes

The channels on the transmitter boxes must be set so that the data can be sent from the weather station to the console. Our standard setting looks like this:

On the ISS (transmitter box attached to the rain gauge)

In the delivery state, all toggle switches are set down. This setting is the desired setting.

davis-iss-dippschalter-default

To test the functionality of the transmitter unit, switch No. 4 can be set up. Now a small LED should light up briefly at regular intervals. Then set the toggle switch No. 4 down again.

davis-iss-dippschalter-flash

On the leaf / soil unit (transmitter box with the leaf wet sensors)

On delivery, all toggle switches are set down here as well. Please set switch No. 3 upwards. All other switches stay down.

davis-leaf-dippschalter-default

To test the functionality of the transmitter unit, switch No. 4 can be set up. Now a small LED should light up briefly at regular intervals. Then set the toggle switch No. 4 down again.

The fields marked with * are required.

I have read the data protection information.